Products
The work space is inlaid with a special rubber which is resistant to abrasive and aggressive particles at the temperature below 100 o C. The pump construction is laid on its own substructure and substructure for electric motor. It runs through a multi-wedged pulley. The pump is made by a direct work from the electric motor or through a hydrodynamic joint, depending on the working conditions.
enables turning the system on without surge through which the use of power surge (peak) is avoided. Furthermore, they enable a stable maintenance of the technological process according to previously established principles. The joints is supplied with thermic fuse that turns off each system breakdown during work from unexpected situations. There are power joints in manufacturing from 20 to 2000 kW, and the performances can be regulated and unregulated depending on the buyer’s order.
the following types of hydro-cyclones are being manufactured with the following sizes of apexes and vortexes as well as hourly flow.
TIP | Q(m³/h), P=1 bar | Dimension of apex | Dimension of vortex |
---|---|---|---|
HC 150 | 8 to 21 | 12,17,24 | 40 |
HC 250 | 18 to 58 | 17,24,34 | 50 |
HC 350 | 30 to 91 | 24,34,38 | 78 |
HC 500 | 30 to 168 | 34,48,75 | 110 |
HC 750 | 75 to 220 | 48,75,100 | 150 |
we are manufacturing tables in a separate construction or leveled battery with one, two or three levelled tables. The table dimensions range from 4 x 2 m to 27 x 12 m, or according to the required dimensions from the customers. Besides that, we manufacture a smaller laboratory table LKS dimension 1010 x 400 mm.
the following conditioners are being manufactured sorted by dimensions: f/H (m); 1,6 / 1,6 m; 2 / 2 m; 2,5 / 2,5 m; 3/3. The volume ranges from 2 to 7 m 3 . The device can be gummed in the inside as well as the propeller upon the request of the buyer.
this device is manufactured for a capacity of 1,1 m 3 /h to 2,3 m 3 /h and serves for ore flotation in lead and zinc floating as well as other metals that are separated through the wet method.
this product is intended for extension of the pipe network in water transport, muddy water, pulp and crushed ore. It is used for connecting steel, plastic or other types of pipelines. They are very simple constructions for fast assembling and dissembling and are manufactured from silumin as a standard procedure or some other material upon a request. Sealing rubber rings are made out of a special rubber for 10 bars of pressure.
Reservoirs are products intended for flotation and other technological processes where collection of working fluid is necessary. It is constructed to accept the upcoming fluid or as a starting flow of the fluids that move through our pumps. Their capacity ranges from 0,3 to 4,2 m 3 . The reservoir is made of steel sheet, but can also be gummed or non-gummed which depends on the choice of the buyer.
The dimensions of vacuuming and pressuring line are 5/4”. It weighs 10 kg, and its dimensions are 300x200x300 mm. vacuuming height is 2 mVS and its capacity is 25 l/min.